EMSENS – MDC02

EMSENS MDC02

 

Equipped with a three-dimensional cutting system, the MDC02 makes it possible to cut cubes from raw products (pork belly) or reconstituted (in a cylinder) at a temperature of -12 ° C (± 5 ° C depending on the concentration in salt).

The loading capacity of the machine is 700 x 300 x 120 mm, the machine accepts out of shape bacon pieces.

The bacon piece is pressed to get a 210 mm wide block, it is then pushed through a bi-dimensional cutting disk to produce bacon stripes from 4 mm to 11 mm of section according to the tools used.

In the case of the use of reconstituted products up to Ø120mm, the maximum length of these cylinders is 700mm.
The cylinder is held in the cutting chamber and is then pushed through three-dimensional cutting tools making cubes with a cross section of 4 to 11 mm depending on the tool chosen.

This machine also allows the production of stamps (20 mm x 2 mm for example).

ADVANTAGES

– Offers top quality cutting, including a hydraulic press to dice bacon pieces with bending of 120mm

 – In the case of the use of cylindrical reconstituted products (up to 120mm), the press guides without forcing the product to the cutting device.

– MDC02 is a machine designed to cut 2500kg of cubes / hour

– Exit of product is done using a vibrating belt

– Separates waste and good product automatically using a specific belt

– Easy to clean and takes into account the constraints of the food industry

EMSENS – MDC02

FEATURES:

Productivity:  2 500 kg / h for reconstituted cylinders of 7.50 kg
1200 kg / h for 3.5 kg pork belly
(Cycle time of about 10.4 seconds for making 10x10x10 cubes)
Loading capacity: Up to Ø120mm (for reconstituted products)
700 x 300 x 120 (for pork belly),
Power: electrical control, hydraulic, pneumatic and electrical power.
Materials: stainless steel and polymers
The rules dictated by EHEDG for the manufacture of machines dedicated to the food industry allow us an optimum design in order to meet your sanitary requirements.
This material is in conformity with the following directives and bills:
Food contact: EC1935/2004
Good manufacturing practice: EC2023/2006
Machines: EC2006/42
CEM: EC 2004/108

DOWNLOAD BROCHURE

TECHNICAL SPECIFICATIONS